Search
ESCON 70/10
SKU
422969
Speed servo-controller for DC and BLDC motors up to 700W - 4 available I/O - Reduced dimensions - Controller configurable via USB and graphic interface! Supplied without cable!
5 days up to 5 units.
- Buy 2 for €365.00 each and save 9%
- Buy 5 for €345.00 each and save 14%
- Buy 10 for €302.00 each and save 25%
- Buy 25 for €302.00 each and save 25%
Key features
| Manufacturer | Maxon motor |
|---|---|
| Technologies | BLDC |
| Gammes | Controllers |
| Max permanent output current | 10 A |
| Max. power output | 700 W |
| Power supply voltage | 1à 70 V |
| Peak output current | 30 <20 sec A |
| Programming | No |
| Maximum motor speed | 150000tr/min |
Detailed specifications
| Encoder power supply | +5 VDC 70 mA |
|---|---|
| Hall Effect sensor power supply | +5 VDC max. 30 mA |
| Analog | Analogue 0 à 5Vdc ou PWM signal (fixed amplitude 0à 5Vdc, 1 kHz…10 kHz) |
| Housing | 100 x 80 x 22 mm |
| Encoder | Yes |
| Motor and power supply connector | Terminal block |
| Encoder connector | HE10 |
| Hall Effect sensor and controller connector | Terminal block |
| CONNECTIONS | .......... |
| Max permanent current | Yes |
| Motor short | Yes |
| Short | Yes |
| Short | Yes |
| Enable/disable | Yes |
| INPUTS | .......... |
| Operational | -30° à +45°C |
| Travel limits | No |
| Mounting | Flanc pour vis M4 |
| Relative humidity | 20 à 80% non condensée |
| Polarity reversal | No |
| Offset | No |
| Weight | 259 g |
| PROTECTION | .......... |
| Ready | Yes |
| SETTINGS | .......... |
| Direction | Yes |
| OUTPUTS | .......... |
| Under | Yes |
| Storage | -40° à +85°C |
| Boost | Yes |
| Current overload | Limitation par réglage |
| Over | Yes |
| Graphic interface display | Yes |
| Max speed | Yes |
Downloads
 2D Plan |
| 3D Plan |
| Product description |
| User Manual |