Search
NANO PAP 40/3 avec cables
SKU
569464
This digital power controller for stepper motors has a small footprint.
It is a motor motion controller that operates at up to 3 A per phase.
Supplied without configuration cable.
It is a motor motion controller that operates at up to 3 A per phase.
Supplied without configuration cable.
5 days up to 5 units.
- Buy 2 for €123.00 each and save 8%
- Buy 5 for €116.00 each and save 13%
- Buy 10 for €101.00 each and save 25%
- Buy 25 for €90.00 each and save 33%
Key features
| Manufacturer | Mdp Electronics |
|---|---|
| Technologies | Stepper |
| Gammes | Controllers |
| Number of microsteps | 1.2.4.8.16.32 |
| Power supply voltage | 12 à 40 V |
| RMS current per phase | 0,2 à 3 A |
| Max. clock frequency | 320 kHz |
| Motor control mode | Bipolaire 4 fils |
Detailed specifications
| Nominal current per phase | Par liaison série A |
|---|---|
| Power supply | Par fusible réarmable |
| Housing | 50x50x30 |
| Controller connector | JST PH 7 points (pour fiche PHR-7) |
| Power connector | JST PH 4 points (pour fiche PHR-4) |
| Standby current | Par liaison série A |
| Motor short | Yes |
| Enable | 5 à 24 VDC |
| Mounting | Par vis M3 |
| Step clock | 5 à 24 VDC |
| Relative humidity | 20 à 80% non condensée |
| Number of microsteps per step | Par liaison série |
| Weight | 40 g |
| Direction | 5 à 24 VDC |
| Storage | -40° à +85°C |
Downloads
 2D Plan |
| Product description |
| User Manual |