Search
NANO PAP avec cables
SKU
569610
This digital power controller for stepper motors has a small footprint.
It is a motor motion controller that operates at up to 3 A per phase.
The motion controller operates in micro-step mode down to 1/32.
It is simple to install and wire.
This power controller is a high-performance product with an attractive price.
This motion controller is configurable (current, micro-step mode and operating modes)
It is possible to adjust the motor’s noise level.
Supplied without configuration cable.
It is a motor motion controller that operates at up to 3 A per phase.
The motion controller operates in micro-step mode down to 1/32.
It is simple to install and wire.
This power controller is a high-performance product with an attractive price.
This motion controller is configurable (current, micro-step mode and operating modes)
It is possible to adjust the motor’s noise level.
Supplied without configuration cable.
5 days up to 5 units.
- Buy 2 for €90.00 each and save 8%
- Buy 5 for €85.00 each and save 13%
- Buy 10 for €74.00 each and save 24%
- Buy 25 for €66.00 each and save 33%
Key features
| Manufacturer | Mdp Electronics |
|---|---|
| Technologies | Stepper |
| Gammes | Controllers |
| Number of microsteps | 1.2.4.16 |
| Power supply voltage | 10 à 30 V |
| RMS current per phase | 0,2 à 1 A |
| Current in standby mode | 70% de In A |
| Max. clock frequency | 160 kHz |
| Motor control mode | Bipolaire 4 fils |
Detailed specifications
| Nominal current per phase | Par potentiomètre A |
|---|---|
| Power supply | Par fusible réarmable |
| Housing | 38x38x17 |
| Controller connector | JST PH 7 points (pour fiche PHR-7) |
| Power connector | JST PH 4 points (pour fiche PHR-4) |
| Motor short | Yes |
| Enable | 5 à 24 VDC |
| Mounting | Par vis M3 |
| Step clock | +5 VDC |
| Relative humidity | 20 à 80% non condensée |
| Number of microsteps per step | Par microswitch |
| Weight | 15 g g |
| Direction | 5 à 24 VDC |
| Storage | -40° à +85°C |
Downloads
 2D Plan |
| User Manual |